24 hour emergency boiler repair Closeby

Services Offered By Plumbers in Bristol

A plumber in Bristol is a very important person who plays a very crucial role in the smooth running of a home or business premises. The supply of clean water and the proper disposal of waste from a building is the responsibility of the Bristol plumber.

Boiler Servicing & Repairs

Users of a building require water every so often and will, therefore, use water appliances like sinks, toilets and water fountains. The waste then has to be disposed of through the sewage system. The water supply and disposal systems require installation, repairing and maintenance and this is ably done by a plumber in Bristol. There are a variety of services that can be provided by a plumber.

Drain Cleaning in Bristol

Blocked drains in Bristol are a very common plumbing problem and they occur due to a variety of reasons. Foreign objects can get into the drainage due to children flushing large objects like toys down the toilet. Leaves are also a common cause of blocked drains when they accumulate in the drainage pipes.

A gas leak in Bristol can cause explosions while liquid gas that burns inefficiently can produce carbon monoxide. Properly installed gas produces carbon dioxide and vapour which are both harmless. Carbon mo, on the other hand, hand causes health complications when inhaled for a prolonged time.

Boiler Servicing & Repairs

Call a Plumber in Bristol Today

Can I Have a Combi Boiler Installation?

Providing you have enough mains water pressure, typically around 9 litres per minute for a small 24 kW combi boiler or up to 25 litres per minute on some, then there shouldn't be a problem with having a combi boiler installation in your home.

The bigger your home is, the bigger the boiler you need and therefore the more mains water pressure you need.

What size boiler do I need?

A 24 kW boiler is the smallest combi boiler you can get. This size is great for flats and small houses with only one bathroom. If you have two bathrooms, then a 30 kW or similar size should be the right size for your home. This could mean getting a 28 kW or 32 kW depending on which combi boiler make and model you choose to go with on your new heating installation.

Baxi and Ideal Heating boilers are very reliable boilers but not as expensive. Ideal Heating has a bit of a bad reputation because of an unreliable boiler they brought out years ago, but nowadays they make good quality, reliable and competitive boilers and I actually install more Ideal Logic + combi boilers than any other.

They come with 7-year warranties to give you that extra peace of mind with your new central heating installation and at really affordable prices that I can pass on to my customers.

Commercial Boiler Installation

Boiler Installation Cost - Keeping the Cost Down

There must be a good reason why over half of new boilers installed in UK homes are Combi boilers. The efficiency and low installation costs, coupled with space-saving advantages, have propelled this technology to overtake traditional hot water cylinder boilers. This means that when equipping a new build property, or replacing a tired, struggling boiler, Combi boilers are the obvious choice. The cost of any central heating repair varies depending on circumstances; labour costs, miscellaneous materials and those unforeseen alterations are part and parcel with any job.

A properly installed Combi boiler's location within a property (perhaps in the kitchen or tucked away out of sight in a closet, rather than in the loft) is a simple but effective factor in reducing cost and inconvenience for Combi boiler installation, and future servicing. Enlist a reliable plumber, and there's no reason why customers need worry about engineers raising the roof with every routine service or emergency repair!

Emergency Boiler Servicing

Who is the best plumber in Bristol?

What is a thermal imaging plumber I hear you ask?

OK let me explain.

With the technology that is now available today for our modern plumbing and heating engineers. We can now trace blockages as well as water leaks and more with a thermal imaging camera.

Whereas before these cameras arrived these problems were trace by digging up concrete floors, lifting wooden flooring, basically it was a time consuming trying to trace out the problem, as well as expensive for the customer.

Modern technology has now produce a thermal imaging camera that can see where the plumbing and heating engineers cannot.

These thermal cameras have been around for sometime, but they have been way too expensive for the plumbing and heating boys.

Now that the costs have come down a little they are now within their reach.

All Gas Safe Registered Engineers must have a flue gas analyser in their tool kit which as we know is another very expensive piece of kit, now we have the thermal camera that can be added to the kit.

So the first place you would look is directly above where the water is dripping, this is normal. Water will travel the easiest route, so if the route takes it to the other side of the property, you can see it's involved tracing the source.

With the thermal imaging camera, you can trace the route of the leak and locate the source without removing any flooring, ceilings or causing any damage.

Conclusion

These thermal imaging cameras will eventually become part our plumbing and heating engineers tool kits. They can and will save the customer on the final repair invoice.

They also make you look more professional in your work. As customers become more aware of these cameras and what they can do, they will start searching for a thermal imaging plumber instead of just a normal plumber.

Emergency Boiler Servicing

Bristol Commercial Boilers

Water always seeks its own level. That is the physical law in which plumbing is based. If you are a homeowner with zero plumbing awareness, this is one fact that, at the very least, you should be aware of. Take this to heart, because this water principle, coupled with the natural law of gravity and pressure, will make or break your home, bank account, and state of mind, depending on your actions or lack of it.

Plumbing systems work in two ways; one is to take water in, and the other is to take water out. More succinctly, clean water in, dirty or waste water out. If that simple order or sequence gets mixed up, it's time to call a plumber to fix a monumental plumbing disaster.

How does clean water come into your home? That is explained by the natural law of pressure. Pressure allows clean water to pass through pipes, travel upwards to one or several floors, move left or right into this room or that, wherever it's needed. Those ubiquitous water valves control the way these pressurized water move in and around your home. Cold water is easily obtained from your main water supply through the process above. But if you need hot water, the cold water is first redirected to an installed water heater in your home that warms it up. The heated water then travels along the hot water line that again brings the water to all outlets in the home that requires hot water, like the dishwater, the bath tub or the shower.

Plumbing, as you see, is a science. Ignore the science behind it and your home will either be flooded, or you will encounter water damage of varied proportions. Undertaking any plumbing repair, particularly major damages, is best left to the capable hands of plumbers. Some areas have particular local plumbing codes that need to be checked on whether or not a homeowner is allowed to self-repair plumbing problems.

In the long run, knowing the science of plumbing can save a lot of money on your behalf and better protection for your home.


Bristol Plumber