Bristol Plumber

Why Bristol Plumbers Are Very Important

No one can completely prepare for all the inconveniences that can occur during homeownership in Bristol. We expect the electricity to work, our appliances to work, water to flow from the tap, and that same water to drain shortly after. When our Bristol plumbing system fails to work, it can quickly lead to disasters that are expensive and time consuming to fix. But, regardless of how hard we try to keep things in working order, sooner or later things will go wrong. Here are three ways to find an “Bristol emergency plumber near me.”

Boiler Repair

When you own a home, live in a home, or rent out a home around Bristol, you have to be prepared for any issues that may pop up. It is beneficial to plan ahead by creating a list of services that may be required for all different types of maintenance or repairs. Creating a list for electrical services, heating ventilation and cooling services, appliances, and especially plumbing services in Bristol, will allow you to quickly contact and set up an appointment once an unforeseen incident occurs. For ease of use you could organise the list by service, by name, or even by other factors such as pricing and locality.

Low Boiler Pressure

Plumbing Company in Bristol

Water always seeks its own level. That is the physical law in which plumbing is based. If you are a homeowner with zero plumbing awareness, this is one fact that, at the very least, you should be aware of. Take this to heart, because this water principle, coupled with the natural law of gravity and pressure, will make or break your home, bank account, and state of mind, depending on your actions or lack of it.

Plumbing systems work in two ways; one is to take water in, and the other is to take water out. More succinctly, clean water in, dirty or waste water out. If that simple order or sequence gets mixed up, it's time to call a plumber to fix a monumental plumbing disaster.

How does clean water come into your home? That is explained by the natural law of pressure. Pressure allows clean water to pass through pipes, travel upwards to one or several floors, move left or right into this room or that, wherever it's needed. Those ubiquitous water valves control the way these pressurized water move in and around your home. Cold water is easily obtained from your main water supply through the process above. But if you need hot water, the cold water is first redirected to an installed water heater in your home that warms it up. The heated water then travels along the hot water line that again brings the water to all outlets in the home that requires hot water, like the dishwater, the bath tub or the shower.

Plumbing, as you see, is a science. Ignore the science behind it and your home will either be flooded, or you will encounter water damage of varied proportions. Undertaking any plumbing repair, particularly major damages, is best left to the capable hands of plumbers. Some areas have particular local plumbing codes that need to be checked on whether or not a homeowner is allowed to self-repair plumbing problems.

In the long run, knowing the science of plumbing can save a lot of money on your behalf and better protection for your home.

New & Replacement Boiler service

Combi Boiler Installation Cost

What is a thermal imaging plumber I hear you ask?

OK let me explain.

With the technology that is now available today for our modern plumbing and heating engineers. We can now trace blockages as well as water leaks and more with a thermal imaging camera.

Whereas before these cameras arrived these problems were trace by digging up concrete floors, lifting wooden flooring, basically it was a time consuming trying to trace out the problem, as well as expensive for the customer.

Modern technology has now produce a thermal imaging camera that can see where the plumbing and heating engineers cannot.

These thermal cameras have been around for sometime, but they have been way too expensive for the plumbing and heating boys.

Now that the costs have come down a little they are now within their reach.

All Gas Safe Registered Engineers must have a flue gas analyser in their tool kit which as we know is another very expensive piece of kit, now we have the thermal camera that can be added to the kit.

So the first place you would look is directly above where the water is dripping, this is normal. Water will travel the easiest route, so if the route takes it to the other side of the property, you can see it's involved tracing the source.

With the thermal imaging camera, you can trace the route of the leak and locate the source without removing any flooring, ceilings or causing any damage.

Conclusion

These thermal imaging cameras will eventually become part our plumbing and heating engineers tool kits. They can and will save the customer on the final repair invoice.

They also make you look more professional in your work. As customers become more aware of these cameras and what they can do, they will start searching for a thermal imaging plumber instead of just a normal plumber.

Central Heating

Boiler Maintenance in Bristol

Can I Have a Combi Boiler Installation?

Providing you have enough mains water pressure, typically around 9 litres per minute for a small 24 kW combi boiler or up to 25 litres per minute on some, then there shouldn't be a problem with having a combi boiler installation in your home.

The bigger your home is, the bigger the boiler you need and therefore the more mains water pressure you need.

What size boiler do I need?

A 24 kW boiler is the smallest combi boiler you can get. This size is great for flats and small houses with only one bathroom. If you have two bathrooms, then a 30 kW or similar size should be the right size for your home. This could mean getting a 28 kW or 32 kW depending on which combi boiler make and model you choose to go with on your new heating installation.

Baxi and Ideal Heating boilers are very reliable boilers but not as expensive. Ideal Heating has a bit of a bad reputation because of an unreliable boiler they brought out years ago, but nowadays they make good quality, reliable and competitive boilers and I actually install more Ideal Logic + combi boilers than any other.

They come with 7-year warranties to give you that extra peace of mind with your new central heating installation and at really affordable prices that I can pass on to my customers.