24 hour emergency boiler repair Closeby

Services Offered By Plumbers in Bristol

A plumber in Bristol is a very important person who plays a very crucial role in the smooth running of a home or business premises. The supply of clean water and the proper disposal of waste from a building is the responsibility of the Bristol plumber.

Boiler Swap

Users of a building require water every so often and will, therefore, use water appliances like sinks, toilets and water fountains. The waste then has to be disposed of through the sewage system. The water supply and disposal systems require installation, repairing and maintenance and this is ably done by a plumber in Bristol. There are a variety of services that can be provided by a plumber.

Drain Cleaning in Bristol

Blocked drains in Bristol are a very common plumbing problem and they occur due to a variety of reasons. Foreign objects can get into the drainage due to children flushing large objects like toys down the toilet. Leaves are also a common cause of blocked drains when they accumulate in the drainage pipes.

A gas leak in Bristol can cause explosions while liquid gas that burns inefficiently can produce carbon monoxide. Properly installed gas produces carbon dioxide and vapour which are both harmless. Carbon mo, on the other hand, hand causes health complications when inhaled for a prolonged time.

Boiler Swap

Call a Plumber in Bristol Today

Many home-owners can attest to the fact that plumbers charge very high rates for their services. Not only are labor charges usually well over $100/hr but many times this expense is augmented with high fees for materials as well. With such high rates many customers find themselves asking whether or not plumbers are deliberately trying to gouge them for their expert services. The answer to this question is usually no. There are a couple of main reasons that plumbing repairs tend to be so expensive and they don't have anything to do with the plumber's desire to exploit customers.

These are just a few of the reasons that plumbing repairs can be so expensive. While it might be tempting to look for a handyman to keep costs down, it is much safer in the long run to hire a licensed plumber to get the job done right the first time.

Combi Boiler Installation

Facts About Licensed Plumbers

We only notice the importance of plumbing in our lives when something goes wrong with the house's plumbing system. This could be water or gas leaks and hard to flush toilet bowls. When things such as these happen, we either fix and repair the problem or hire a professional plumber if the problem seems too complicated.

Just like in any other places, Victoria too implements guidelines, policies and permit for the plumber to become licensed. The licensed Victoria Plumber should also follow the standard operating procedures so that clients are assured of excellent and standardized service from them. When a plumbing work in Victoria is at $750 and above (inclusive of appliances, parts and labor), a compliance certificate issued only by the licensed plumber is required to be furnished to the client whom the work was done for. This certificate is the means by which the plumber ascertains and certifies that the plumbing job is legislative requirements compliant.

This qualification and accreditation of the plumber may be proven through a photo ID which also shows the expiration of the plumber's license. The photo will help the consumer identify if the person to which the license is issued to is really the plumber he or she has hired. The license ID is also of help to the consumer in a manner of showing what area of plumbing the plumber is licensed to perform, this is shown at the back of the card. Three written and printed quotes must also be required by the consumer. The compliance certificate must also be given to the consumer for a plumbing task that requires it.

Boiler Servicing & Repairs

Who is the best plumber in Bristol?

What is a thermal imaging plumber I hear you ask?

OK let me explain.

With the technology that is now available today for our modern plumbing and heating engineers. We can now trace blockages as well as water leaks and more with a thermal imaging camera.

Whereas before these cameras arrived these problems were trace by digging up concrete floors, lifting wooden flooring, basically it was a time consuming trying to trace out the problem, as well as expensive for the customer.

Modern technology has now produce a thermal imaging camera that can see where the plumbing and heating engineers cannot.

These thermal cameras have been around for sometime, but they have been way too expensive for the plumbing and heating boys.

Now that the costs have come down a little they are now within their reach.

All Gas Safe Registered Engineers must have a flue gas analyser in their tool kit which as we know is another very expensive piece of kit, now we have the thermal camera that can be added to the kit.

So the first place you would look is directly above where the water is dripping, this is normal. Water will travel the easiest route, so if the route takes it to the other side of the property, you can see it's involved tracing the source.

With the thermal imaging camera, you can trace the route of the leak and locate the source without removing any flooring, ceilings or causing any damage.

Conclusion

These thermal imaging cameras will eventually become part our plumbing and heating engineers tool kits. They can and will save the customer on the final repair invoice.

They also make you look more professional in your work. As customers become more aware of these cameras and what they can do, they will start searching for a thermal imaging plumber instead of just a normal plumber.

Boiler Repair

BristolĀ Commercial Boilers

Can I Have a Combi Boiler Installation?

Providing you have enough mains water pressure, typically around 9 litres per minute for a small 24 kW combi boiler or up to 25 litres per minute on some, then there shouldn't be a problem with having a combi boiler installation in your home.

The bigger your home is, the bigger the boiler you need and therefore the more mains water pressure you need.

What size boiler do I need?

A 24 kW boiler is the smallest combi boiler you can get. This size is great for flats and small houses with only one bathroom. If you have two bathrooms, then a 30 kW or similar size should be the right size for your home. This could mean getting a 28 kW or 32 kW depending on which combi boiler make and model you choose to go with on your new heating installation.

Baxi and Ideal Heating boilers are very reliable boilers but not as expensive. Ideal Heating has a bit of a bad reputation because of an unreliable boiler they brought out years ago, but nowadays they make good quality, reliable and competitive boilers and I actually install more Ideal Logic + combi boilers than any other.

They come with 7-year warranties to give you that extra peace of mind with your new central heating installation and at really affordable prices that I can pass on to my customers.


Bristol Plumber