5 Star Rated Boiler Specialist Close

Services Offered By Plumbers in Bristol

A plumber in Bristol is a very important person who plays a very crucial role in the smooth running of a home or business premises. The supply of clean water and the proper disposal of waste from a building is the responsibility of the Bristol plumber.

Low Boiler Pressure

Users of a building require water every so often and will, therefore, use water appliances like sinks, toilets and water fountains. The waste then has to be disposed of through the sewage system. The water supply and disposal systems require installation, repairing and maintenance and this is ably done by a plumber in Bristol. There are a variety of services that can be provided by a plumber.

Drain Cleaning in Bristol

Blocked drains in Bristol are a very common plumbing problem and they occur due to a variety of reasons. Foreign objects can get into the drainage due to children flushing large objects like toys down the toilet. Leaves are also a common cause of blocked drains when they accumulate in the drainage pipes.

A gas leak in Bristol can cause explosions while liquid gas that burns inefficiently can produce carbon monoxide. Properly installed gas produces carbon dioxide and vapour which are both harmless. Carbon mo, on the other hand, hand causes health complications when inhaled for a prolonged time.

Commercial Boiler Installation

Call a Plumber in Bristol Today

Some boiler installation will not require combustion vents because the device being installed is an unvented one. The best thing that anyone can do if they need a new appliance of this nature is have the professionals do the boiler installation for them. If you are going to try and do the boiler installation for yourself then you will need to know some facts about combustion vents.

Boiler installation regulations require the proper venting system be installed so that the proper draft can develop to create efficient combustion. The proper draft will create a positive air flow that will carry all of the bi-products of combustion safely to an area above the building to prevent a possible build-up of these bi-products. Local building codes for the area that you live in must be checked before you go and buy the items necessary to install one of these appliances. You must follow all building codes and you must get all paperwork and permits completed with the local authorities before work can begin. Once you do begin to work on this installation process you must remember that you can never support the weight of the vent designed to remove combustible gases on the top of the boiler tank. This is very dangerous; all vents must be attached using approved methods to keep them secure and prevent leaks.

These devices are present in almost every home in the world. We have become so accustomed to their presence that we forget the items can be dangerous and we should be cautious when operating them. Take time to read the manufacturers paperwork that they give you when you buy one of these items. Everything you need to know is in that paperwork.

Central Heating

The Importance of Plumbers and Plumbing Services

The piping system is a very important aspect for any building and if it is not functioning properly then the structure may not be usable. There are pipes that bring in clean water to the building while others get rid of waste. Sometimes pipes can have various problems which require to be fixed by a plumber.

Burst pipes can be a real inconvenience as they tend to interrupt the activities that are to take place in a building. Businesses can get losses and property can be damaged through flooding after pipes burst. It is therefore important to get an emergency plumber to deal with the problem as soon as possible.

How Pipes Burst

During winter, water that is in your pipes can end up freezing. When water solidifies, it expands and exerts pressure on the pipes which causes them to burst. If pipes do not receive the proper servicing, old pipes can end up corroding. Corrosion causes the pipes to weaken and a build up of calcium exerts pressure on the weakened pipes which causes them to burst open. Pipes made from steel are prone to the problem of corrosion. Tree roots can also cause your pipes to burst.

How To Prevent Burst Pipes

It is a good idea to protect yourself by taking measures to reduce the risk of burst pipes. You should ensure that you identify where the stop cock is located. You should also know how to operate it so that in case there is any leak in the house, you can quickly shut off the water supply.

Pipes that are located in unheated areas of the house are prone to bursting due to freezing. These pipes therefore need to be lagged by a plumber. Pipes that are in the ground should also be lagged and they should be laid deep enough in the ground. You should insulate your outside taps and pipes, and your cold water tank should also be insulated.

Combi Boiler

Who is the best plumber in Bristol?

If you're looking to have a new central heating system installed in your home you need to make sure you choose the right installation company. There is the option of looking through local papers or the yellow pages to finding a local plumber or installer. You need to make sure the company you choose is experienced and legally allowed to carry out the installation. Every single year people die from Carbon Monoxide poisoning which is caused by incorrectly installed and maintained gas appliances, which is why it is so important to choose the right company.

You might think that choosing a larger well known company might cost a lot more but generally they don't. Because they get wide spread coverage they can drop their prices. So don't dismiss the big boys over local companies as you may find them far more competitive in price than you first thought.

One way to see if the company is fit for the job is to find out if they have won any awards. There are plenty of organisations that reward excellence service in plumbing and heating. The Corgi Awards is one, they have been around for 6 years and winning one of these awards is very prestigious in this industry. They look at customer service, safety issues and environmental responsibility and look to recognise and reward those for their achievement.

The H&V awards are given out to excellence across the The Heating and Ventilating Contractors' Association (HVCA). In 2010 Northern Gas won installer of the year at these awards which tells us they are a company with a great service that we can trust.

If you're looking to have gas central heating installed and is thinking of choosing a lesser well known company or a company that hasn't won any prestigious awards you should make sure they are on the Gas Safe register. This is most important. The Gas Safe Register is a government incentive which replaced the previously CORGI standard. Basically companies are only allowed to install Gas appliances if they are on the register, and each engineer will carry a Gas Safe card to prove to you their credentials and proving their skills are up to date and relevant to the work they are doing.

Central Heating Repairs

BristolĀ Commercial Boilers

A plumber is a very important person who plays a very crucial role in the smooth running of a home or business premises. The supply of clean water and the proper disposal of waste from a building is the responsibility of the plumber.

Users of a building require water every so often and will therefore use water appliances like sinks, toilets and water fountains. The waste then has to be disposed through the sewage system. The water supply and disposal systems require installation, repairing and maintenance and this is ably done by a plumber. There are a variety of services that can be provided by a plumber.

Drain Cleaning

Blocked drains are a very common plumbing problem and they occur due to a variety of reasons. Foreign objects can get into the drainage due to children flushing large objects like toys down the toilet. Leaves are also a common cause of blocked drains when they accumulate in the drainage pipes.

A gas leak can cause explosions while liquid gas that burns inefficiently can produce carbon monoxide. Properly installed gas produces carbon dioxide and vapor which are both harmless. Carbon monoxide on the other hand causes health complications when inhaled for a prolonged time.

A gas fitter installs appliances such as burners, regulators, valves and gas meters. There are different types of gas appliances which vary in how complex they are and in the level of pressure that is needed in order to operate the appliances. A plumber that is trained in gas fitting should be able to identify where the gas equipment should be installed. He should also test the pipes that are to hold the gas.


Bristol Plumber