Bristol Plumber – What Services Do They Offer?
Bristol Plumbers play a vital role in most homes as they come in handy whenever the plumbing system breaks down. The plumbing systems in Bristol are the pipes put together in a building to supply clean water for drinking and cleaning, in addition to proper disposal of dirty water.
Plumbing companies in Bristol have certified and licensed plumbing personnel who can offer either commercial or residential services. Here are a wide range of services offered by a Bristol plumber:
– Water Heater Systems Installation – Qualified plumbers in Bristol can install new water heating systems and can also replace faulty ones. Being experts, they also analyse and evaluate the needs of the client. They then advice on whether to repair or replace plumbing system, or install a tank or go tankless. The good training they acquired gives them the knowledge and skill to carry out water heater jobs of all kinds, whether repairing or installing in a commercial building or a small home. The water heater systems they can install include, under the sink water heaters, the tankless high efficiency water heaters among others.
– Renovation – If you are renovating your bathroom, toilet or the kitchen sink, the Bristol plumber you have engaged can advice on the best and latest faucets to install. He/ she will also advice on the fixtures that will help you save energy and water. He will also help in installing the new fixtures.
Many often do not think much of plumber and plumber services in Bristol. This is due to many reasons such as the low prestige of the trade or the infrequent need of and contact with the plumber in the Bristol area. However, they provide a valuable service to society, allowing us to enjoy the comfort of our environment with a well functioning plumbing system.
Call A Emergency Plumber in Bristol
Everyday people say to me 'how can you charge that much money?' And my response is always 'I charge based on supply and demand'. As a plumber in Edmonton, and I am sure this is the same everywhere else we charge by the job or by the hour. And why would I go to someones house to fix something for $40 per hour when everybody else in Edmonton is more than willing to pay $85 per hour.
I am not saying it is OK to over charge someone, I have seen that and do not agree with it. Many times people have called me up and said what do you charge to unplug a drain. I can only give them a guess because with all the experience in the world nobody knows how long it would take to fix. But there is times when people have asked only to find out if the person who was just at their home was charging a proper price. For instance I was called to unclog a toilet once, and could not make it there that day as I was already booked. They called someone else and within 20 minutes of the plumber showing up the toilet was working again. The price was $350. When they told me this I could not believe it. That price is way too high, but the homeowner could have called another company.
Now, just to tell you that is not all profit for the company. They have van costs, overhead, multiple forms of advertising, non billable employees, just to name a few. The average shop of 5 plumbers will have total expenses of $750,000 per year. This can be more or less depending on the type of plumbing company. Construction, service, or what have you. With 5 plumbers the average company will gross about $1,000,000 per year. So there is good profit in this type of business. But it only takes one bad plumber in the company for them to quickly lose $200,000-$300,000. The risks are high, very high, and many fail.
After talking to some clients about this they say that has nothing to do with me. But in reality it has everything to do with the consumer. Look at shop lifting. The price of most products include a certain volume of those being stolen each year. A company can not survive if they do not pass these costs onto the consumer. And if you as the consumer do not want to pay then you have the option of repairing the problem yourself. Now if the plumbing company is giving you good service and you are happy with them stay with them. If they are charging a ridiculous price, then find someone else. Just make sure what the going rate is and don't pick the bottom guy, or the top guy. Most time the company in the middle will give you the most bang for your buck!
Combi Gas Boiler Installation and Replacement Guide
There is lots to consider when you are considering a new boiler installation. This guide will take you through the process from start to finish. This is quite a difficult task describing in words what a Gas Safe engineer does every day. Not all of the points will be relevant to your particular installation but this guide will at least give you an idea of what to expect from your new boiler and what to expect from an installer coming to your house.
Things to consider:
- Your budget - grants, loans and other schemes
- Finding an installer - getting 3 quotes
- The current water pressure of your system
- Your current system - layout/design and condition, boiler siting
- Your hot water demand - bathrooms, ensuites etc
- Choosing a boiler
- Upgrading your pipework - gas and water pipework
- Adding a MagnaClean
- Adding thermostatic radiator valves/room thermostat
- Adding additional radiators
- Powerflusing your system or flushing your system
- Commissioning your system
- Filling in the benchmark/notifying building control
- Advising the customer on how to get the best efficiency from their boiler
- Installers working to best practice
Your budget - grants, loans and other schemes
There are lots of schemes available depending on your circumstances. The new Boiler Scrappage Scheme is available to all households in England who have a G rated boiler in their home. It gives £400 towards the cost of a new boiler installation. There is also a scheme called the Warm Front Scheme which provides upto £3500 towards home heating and insulation improvements. To be eligible you must be on some sort of benefit or be a low income household. It is normally a bad idea to finance your boiler installation using a credit card or bank loan. Although there are cost benefits to be gained by having a new condensing boiler these will be eaten up by repaying the loan. If your current boiler is in good working order and you are worried about it breaking down then a British Gas homecare agreement is advisable at around £19 per month. An Npower agreement which offers less benefits is also available at around £7.99 per month.
Finding an installer - getting 3 quotes
You should aim for 3 quotes. This is more than adequate to get a good idea of what you want. Each individual engineer will give you different ideas on how best to go forward. They will also have their own favourite boilers and methods of working. It is a good idea to bounce ideas and questions around to ascertain whether the engineer is actually competent in the field he will be required to work within. Unfortunately there are lots of newly qualified plumbers and gas engineers in this industry and although they are perfectly safe and 'passed off' to work they may not be a) able to advise you of the most efficient method going forward, b) advise you completely wrongly or c) not actually have an answer. Sometimes it may be difficult to find someone you trust; after all, this will be a huge investment.
Often using the yellow pages can be a bad idea. So can using someone who posts leaflets through the door. The best and trusted method will always be by personal recommendation. Asking the engineer lots of questions can also give you some degree of confidence. Checking their Gas Safe registration should also be a priority. Unfortunately there are lots of illegal gas engineers operating and these people are putting lives at risk. Checking someones gas safe registration is very easy. Ask to see a Gas Safe registration card. Every engineer carries a card and it amazes me that 99.5% of customers do not ask for ID. Every engineer should be proud of their qualifications and love to show them off. Do not be shy and in future make a point of it.
Once you have got your 3 quotes you need to analyse what you are getting. Quotes should be broken down as much as possible. This will give you an idea of what exactly you are paying. I don't understand how companies can justify listing a load of materials and specifications and then adding a figure. Costs should be fixed price costs whether you are a millionnaire or on a very low budget;)
It is best to get a written contract for your own benefit. If the company doesn't offer one then you can easily draw one up. This will protect against faults that might develop later on after the system has been installed. If installed to best practice and following all manufacturers instructions then a central heating system will only rarely breakdown due to a manufacturer component fault. That is why respected installers offer a personal guarantee on all their work, this can be upto 5 years but 3 years is normal. This is alongside normal manufacturer guarantees which can be upto 5 years parts and labour. Other ways of finding an installer can be the internet however personal recommendation is always the best method.
Adding a MagnaClean
Some companies will not fit and guarantee their work if you do not agree to having a MagnaClean fitted. This additional work can be carried out for a very reasonable price as they would be already carrying out work in the property. More information can be found by clicking on the MagnaClean website. Unfortunately new condensing boiler have very weak heat exchangers and the MagnaClean will save them from getting damaged. This is why most companies insist on every customer having one installed.
Adding thermostatic radiator valves/room thermostat
Adding thermostatic radiator valves can significantly reduce your heating bills. It allows each radiator to be controlled individually. Why have the heat on in the whole house when you only need it in one? It is recommend not turning a valve completely off but setting it to 1. Adding TRV's will in the long run save you lots of money and can be very cheap to install. Some companies will have offers when supplying and fitting these. Energy efficiency should be promoted whenever.
A room stat or a programmable room stat is a legal requirement. Your installer will advise what the best option for you is. A wireless stat will be more expensive but there is the advantage of no visible wiring.
Adding additional radiators
If you need to add additional radiators it is best to add these while having a new boiler installed. It will more than likely be cheaper. Some of your radiators may be undersized or very old and you should consider upgrading these.
Powerflusing your system or flushing your system
There is a huge difference between powerflushing your central heating system or just flushing your system. Powerflusing involves higher pressure and circulates fresh water and special chemicals around your system. It is normally needed on older systems as sludge and dirt builds up over years and years. This will mean that you either have cold spots or not very hot radiators. Having fresh water in a system means water can be heated up to the maximum pressure the boiler will allow and will mean hotter radiatiors which in turn means more efficiency. A powerflush is not a legal requirement when replacing your boiler but it is advisable. When a powerflush is taken with a boiler installation discounts can be given.
Normal cold and hot water flushing is a requirement when a boiler is installed. Cleanser and inhibitor is added. A hot and cold flush must be done in order to work to best practice. New boilers do not like any dirt in the system, heat exchangers can get very 'clogged' up and the cost of replacement can be very great.
Commissioning your system
Things that should be included in your installation and are considered best practise:
1. Flushing with Fernox or Sentinel product/filling with inhibitor from same
2. Roomstat/programmer, TRV's (best practise, recommended)
3. Balancing and commissioning according to manufacturers instructions, important so as not to invalidate warranty.
4. Decommisioning of old boiler, tanks and all waste materials associated with installation
5. Making good eg. new and old flue openings
6. Completion of Benchmark log book, important.
7. Notification of new boiler to Building Control
8. At least 3 years guaranteed on pipework and associated fitting (the boiler manufacturer will have their own guarantees.)
The above should be in writing to protect your expensive new purchase.
Filling in the benchmark/notifying building control
Filling in the benchmark and notifying building control is part of commissioning process and a legal requirement. Pressures and temperatures need to be taken to ensure the system is correctly configured. Not filling out the benchmark and not notifying building control may cause problems if you ever decide to sell your property as proof the boiler was installed by a competent person will be required.
Best Plumbing Company in Bristol
Boilers are an inextricable part of our lives today. If you live in a cold climate, you're certainly aware of the need of heating set ups in your life. Have you ever thought of a chilly morning when you would have to place your foot on a cold floor? If you've already experienced it, you definitely know the scary feeling of treading on a cold surface. Therefore, it's very essential to keep your home interiors cozy and warm during the winters. These central heating set ups are definitely the most cost-effective or economical forms of keeping your house comfortable. In place of heating every room individually, you can heat the entire building from a single unit. The starting installation expenses are a bit massive, but the operating costs are pretty low or reasonable. Some of the biggest advantages of these installations are reliability, safety and durability.
When you're a homeowner, you have countless responsibilities lying on your shoulders. These responsibilities are not restricted to utility bill disbursements or architectural framework of your residence. At one point of time or the other, you'll realize the need of trained gas engineers at your place. Thanks to improved technology, our lives have become a lot easier or comfortable that what it was a decade back. Today, boilers are an indispensable item, particularly for those who live in the colder regions of the planet. From taking bath and brushing teeth to washing utensils and clothes, you need hot water for a number of reasons. Just buying a good heating set up isn't enough; you need to hire professional boiler installers as well. People often tend to save money by attempting the installation job on their own, but that's not very advisable. If you lack experience and knowledge, the DIY attempt can land you in a pool of troubles.
Only a trained and certified gas engineer has the skill to complete the boiler installation work to perfection. However, with so many heating professionals around, making the right choice is often difficult. Although all of them make big promises to offer high quality services, only a handful of them actually keep their words. What's more, there are many fraudulent heating professionals in the market as well. In order to steer clear of these frauds or deceptions, consider taking advice of your friends and relatives who hired such experts in the past. Choose a professional that has knowledge about boiler repairs as well. Keep your eyes and ears open; make a choice that's proves valuable in the long run.
Boiler Installation in Bristol
We only notice the importance of plumbing in our lives when something goes wrong with the house's plumbing system. This could be water or gas leaks and hard to flush toilet bowls. When things such as these happen, we either fix and repair the problem or hire a professional plumber if the problem seems too complicated.
Just like in any other places, Victoria too implements guidelines, policies and permit for the plumber to become licensed. The licensed Victoria Plumber should also follow the standard operating procedures so that clients are assured of excellent and standardized service from them. When a plumbing work in Victoria is at $750 and above (inclusive of appliances, parts and labor), a compliance certificate issued only by the licensed plumber is required to be furnished to the client whom the work was done for. This certificate is the means by which the plumber ascertains and certifies that the plumbing job is legislative requirements compliant.
This qualification and accreditation of the plumber may be proven through a photo ID which also shows the expiration of the plumber's license. The photo will help the consumer identify if the person to which the license is issued to is really the plumber he or she has hired. The license ID is also of help to the consumer in a manner of showing what area of plumbing the plumber is licensed to perform, this is shown at the back of the card. Three written and printed quotes must also be required by the consumer. The compliance certificate must also be given to the consumer for a plumbing task that requires it.